APPENDIX B: LOADING CUSTOM WAVETABLES

To access the MultiWAVE folder structure for reorganizing wavetables, or loading custom tables, connect MultiWAVE to a computer via USB-C cable (the USB-C jack is on the bottom left behind the panel), and power on the system while holding the MODE button.

MultiWAVE will appear as an external drive called MULTIWAVE.

The folders are as follows:

1-red

2-blue

3-green

4-purple

5-pink

6-orange

7-yellow

8-cyan

Wavetables are stored in WAV format and are compatible with the WaveEdit software by Synthesis Technology.

Filenames must begin with a number from 1 to 8 to designate the slot they will appear in. For example here are the factory contents of the “1-red” bank:

1_tri_to_saw.wav

2_tri_to_square.wav

3_tri_saw_square_pwm.wav

4_square_pwm.wav

5_sine_to_square_to_saw.wav

6_saw_ramp_combo.wav

7_super_saw_index.wav

8_sine_dc_clip.wav

Once you have placed the files of your choosing, eject the drive from the computer. Then press the MODE button to allow the MultiWAVE to boot up as normal, after which the wavetables will be selectable on Page 2.