Click on an Element to Learn
-
Activate Input: Gate input. At rising edge, Channels Activate according to Span control as determined by current Span Mode.
-
Accumulate Input: Gate input. When patched, all Activation messages will be held by the target Channel(s) until gate is received at Accumulate. Channels display Orange to indicate they are being held.
-
Span: Sets the Channel Span for Activation according to current Span Mode. In Channel Index mode, Channel is Activated upon selection if Activate input is unpatched. Set to 12:00 with Span CV Input attenuverter clockwise in Channel Index mode to translate Channel Index messag- es from other N.U.S.S. modules.
-
Span Activity Window: Displays current Span mode as selected by Mode Button. White=Channel Index; Yellow=Round; Blue=Parallel. Lights Bright White in Channel Index when set up to receive Channel Index messages from other N.U.S.S. modules.
-
Mode Button and Activity Window: Selects Span Mode, indicated by Span Activity Window.
-
Span CV Input: Control Voltage input for Span parameter. Modulate with any control signal, or patch Channel Index output from other N.U.S.S. module.
-
Span CV Input attenuverter: Bipolar input attenuator for Span CV Input. Set clockwise with Span panel control set to 12:00 in Channel Index mode to translate Channel Index messages from other N.U.S.S. modules.
-
Channel Index Ouput: Sends a Control Voltage indicating currently Activated channel. Patch to Span input on other N.U.S.S. modules.
-
Spread CV Input: Control Voltage input for Spread parameter.
-
Spread Combo Pot: Bipolar panel control for Spread parameter. Sets direction and amount of modulation sent to unpatched Spreadable parameters according to the settings of their input attenuverters. When Spread CV Input is patched, operates as bipolar attenuator.
-
Mod Shape Button and Activity Window: Selects and denotes Mod Shape.
-
Follow Button and Activity Window: Selects and denotes Follow Mode.
-
Wave Panel Control: Sets wave position in currently loaded wavetable. Spreadable parameter.
-
Wave Attenuverter: Bi-polar input attenuavor for Wave Position Modulation Dissemination or Spread amount.
-
A-Wave CV Input: Control voltage input for A-Wave. Patching this input disconnects A-Wave from Spread and uses CV input for Modulation Dissemination instead.
-
Pitch Panel Control: Sets starting Pitch for Osc A according to the selected Follow mode.
-
Pitch Attenuverter: Bi-polar input attenuavor for Pitch Modulation Dissemination or Spread amount. When Follow is off, set fully clockwise for 1v/oct response.
-
Pitch Exponential Input: Control voltage input for Pitch. Patching this input disconnects A-Wave from Spread and uses CV input for Modulation Dissemination instead. Tracks 1v/oct when Follow is Off and Pitch Attenuverter is set fully clockwise.
-
Pitch Panel Control: Sets starting Pitch for Osc B.
-
Pitch Fine Tune Control: Fine control of starting Pitch for Osc B.
-
Glide Panel Control: Sets Glide time at 1v/oct input.
-
Glide CV Input: Control voltage input for Glide.
-
TRPS. Transpose input: Live input that affects all eight channels. Tracks 1v/oct.
-
V/Oct Input: Modulation Dissemination input for Osc B Pitch. Tracks 1v/oct.
-
Mod Shape Button and Activity Window: Selects and denotes Mod Shape.
-
Wave Panel Control: Sets wave position in currently loaded wavetable. Spreadable parameter.
-
Wave Attenuverter: Bi-polar input attenuavor for Wave Position Modulation Dissemination or Spread amount.
-
B-Wave CV Input: Control voltage input for B-Wave. Patching this input disconnects B-Wave from Spread and uses CV input for Modulation Dissemination instead.
-
Channel 1-8 Outputs: Modular level waveform outputs for individual MultiWave channels. Alter- natively can carry various submixes on outputs 5-8 (detailed by gold legending on panel) when Summing is turned on on Page 2.
-
Channel 1-8 Activity LED's: Display of Channel activity including current amplitude, Spread amount, and Accumulations.
-
Reset Input: Gate input. At gate high, resets MultiWAVE depending on current Span Mode.
Channel Index Mode: Re-Activates selected Channel.
Round Mode: Next Activation will be on Channel 1.
Parallel Mode: Resets all clock dividers so that next Activation Activates all Channels.
-
Page 2 Button and Activity Window: Press button to enter Page 2. Activity Window lights White to indicate Page 2 is active.
-
Mod Time Panel Control: Sets Mod Time. Spreadable parameter.
-
Mod Time Attenuverter: Bi-polar input attenuavor for Mod Time Modulation Dissemination or Spread amount.
-
Mod Time CV Input: Control voltage input for Mod Time. Patching this input disconnects Mod Time from Spread and uses CV input for Modulation Dissemination instead.
-
Blend CV Input: Control voltage input for Blend. Live input.
-
Blend Panel Control: Sets Blend between Osc A and Osc B.
-
Detune Panel Control: Detunes the eight channels of Osc B. In tune at counterclockwise. Harmonic oscillator at full clockwise.
-
Detune CV Input: Control voltage input for Detune. Live input.